Skip to main content

JUMO eTRON T100 zur Montage auf Hutschiene (1 Relaisausgang Wechsler 10A)

Product number: 802120

Product information "JUMO eTRON T100 zur Montage auf Hutschiene (1 Relaisausgang Wechsler 10A) "

JUMO eTRON T100 - electronic thermostat with timer function for mounting on 35 mm top-hat rails

Typ: 701052/8-01-02-01/000

  •  Version: Standard with factory settings
  •  Input: resistance thermometer Pt100, Pt1000, KTY2X-6
  •  Power supply: AC 230 V +10/-15%, 48 to 63 Hz
  •  Option: Digital output PhotoMOS ® relay (connection of resistance thermometers in three-wire circuit is not possible)
  •  Extra code: without
  •  Available in 5 different measuring groups
  •  Intuitive operation and configuration both directly on the device and via the setup programme using the USB interface
  •  User area with 8 adjustable parameters
  •  Data logger functionality for recording measurement data
  •  Dot matrix display with 64 x 80 pixels and support for 4 national languages
  •  Service and operating hours counter for monitoring device utilisation
  •  Connection via PCB terminals with push-in technology for easy installation
  •  Use of 10A relays (changeover contacts) for reliable switching
  •  Option for customer-specific linearisation of the measurement results in the setup program
  •  Limit value monitoring for precise control and monitoring of processes
  •  Timer function for time-controlled execution of actions

The digital thermostat measures the temperature using resistance thermometers, thermocouples or a current of 0(4) to 20 mA and can be configured as a simple heating or cooling thermostat depending on the selected mode.
The thermostat function (heating or cooling) can be started or limited in time using the timer function. The switching states of the relay and digital output, as well as the actual and setpoint values, are shown simultaneously on a backlit display with a resolution of 64 x 80 pixels. The display language can be switched between German, English, French and Spanish.
It is operated via four buttons on the front, while the electrical connection is made via print terminals with push-in technology.
PhotoMOS® relays for limit value monitoring or a digital input for connecting a potential-free contact can be added as an option. A setup programme is available for easy configuration. 

Dimensions

Height 3,2 cm
Length 11,2 cm
Width 7,9 cm

Weight

Weight 194 g

Other attributes

Country of origin DE
Customs tariff number 90321020
Eingang Widerstandsthermometer Pt100, Pt1000, KTY2X-6
Spannungsversorgung AC 230 V, +10/-15 %, 48 bis 63 Hz
Technical data:

Analog Input

The following measurement input variants can be ordered.

Measurement input group 1 (resistance thermometer)

 

Designation                                 Standard

Measuring range

Messgenauigkeita

Ambient temperature influence

ITS

Pt100, Pt1000 in                           IEC 60751:2008

2-/3-Conductor circuit

 

-200 to +600 °C

 

£ 0,25 %

 

£ 0,1´10 -3 1/K

 

90

KTY 2X-6 in 2-Conductor circuit

-50 to +150 °C

£ 1%

£ 0,1´10 -3 1/K

-

Customer Table

150 W to 3000 W

£ 0,25 %

£ 0,1´10 -3 1/K

-

 

Measuring current

ca. 0,5 mA

Sensor Line Resistance

30 W je Cable for 2- and 3-wire circuits

Line Balancing

Not required for 3-wire circuit. In the case of a 2-wire circuit, the line adjustment is carried out by software by entering a fixed line resistance.

Particularities

also programmable in °F

a The accuracy specifications refer to the maximum measuring range. With smaller measuring spans, the linearization accuracy is reduced.

Measurement input group 2 (thermocouple)

 

Designation

Norm

Measuring range

Messgenauigkeita

Ambient Temperature Influence

ITS

Fe-CuNi “L”

DIN 43710:1985-12

-200 to +900 °C

±0,4 %

£ 0,1´10 -3 1/K

68

Fe-CuNi “J”

DIN EN 60584-1:2014

-210 to +1200 °C

±0,4 % ab -100 °C

£ 0,1´10 -3 1/K

90

NiCr-Ni “K”

DIN EN 60584-1:2014

-270 to +1300 °C

±0,4 % ab -80 °C

£ 0,1´10 -3 1/K

90

Customer Table

-15 to 75 mV

±0,4 %

£ 0,1´10 -3 1/K

-

 

Measuring range start/end

within the limits in 0.1 K increments

Comparison Agent

interne Messung über Pt1000 oder extern konstant 0 °C

Reference Point Accuracy (Internal)

±1 K

Particularities

also programmable in °F

a The accuracy specifications refer to the maximum measuring range. With smaller measuring spans, the linearization accuracy is reduced.

b The ambient temperature influence is valid in the range of -20 to +55 °C.

Measurement input group 3 (unit signal)

 

Designation

Measuring range

Measurement accuracy

Ambient temperature influence

Strom (Spannungsabfall £ 2,5 V), frei skalierbar

0 to 20 mA

4 to 20 mA

£ 0,125 %

£ 0,1´10 -3 1/K

Abweichung von 22 °C

Customer Table

0 to 20 mA

£ 0,125 %

Particularities

Skalierung einstellbar

a The accuracy specifications refer to the maximum measuring range. With smaller measuring spans, the linearization accuracy is reduced.

 

Measurement Input Group 4 (NTC Path)

 

 

Customer Table

400 W to 40 kW

£ 0,15 %

£ 0,1´10 -3 1/K

Anschlussart

2-wire circuit

 

 

Measuring current

ca.0,1 mA

Measurement input group 5

 

Designation

Measuring range

Measurement accuracy

Ambient temperature influence

ITS

Ni1000                                         DIN 43760:1987-09

-60 to +250 °C

£ 0,25 %

£ 0,1´10 -3 1/K

Deviation of 22 °C

68

LG-Ni1000                                  Landis & Gyr TK5000 (Siemens HKL)

-60 to +250 °C

£ 0,25 %

£ 0,1´10 -3 1/K

Deviation of 22 °C

 

Kundentabelle

150 W to 3000 W

£ 0,25 %

Sensor Line Resistance

30 W per Line

Connection Type

2-wire circuit

Besonderheiten

also programmable in °F

a The accuracy specifications refer to the maximum measuring range. With smaller measuring spans, the linearization accuracy is reduced.

 

Measuring Circuit Monitoring

In the event of an error, the outputs assume defined states (configurable).

 

Transducer                                 Probe/cable breakage

Probe/line short circuit

Resistance thermometer

is detected

is detected

KTY 2X-6

is detected

is detected

Thermoelement (einzeln)

is detected

is not detected

Strom

4 to 20 mA

0 to 20 mA

 

is detected

is not detected

 

is detected

is not detected

NTC Railway Application

is detected

is detected

Ni1000, LG-Ni1000

is detected

is detected

Digital Input and Digital Output

 

Designation

Funktion

Potential-free contact (option)

or

PhotoMOS®-Relais (Option)

For connection to a commercially available switch or contact Switch-on resistance < 1 k Switch-off resistance > 50 k

max. DC 45 V, 200 mA, max. AC 30 V, 200 mA

Relaisausgang

Relay (changeover) AC 250 V, 10 A (resistive load)

150000 circuits at nominal load

Display

 

Type, Resolution

Dot matrix LCD display with 64 × 80 pixels

Settings

Contrast, brightness and function of the backlight

 

Case

 

Installation height

maximum 2000 m above sea level

Housing type, material

Plastic housing, polycarbonate according to DIN EN 45545 (halogen-free, use indoors only))

Flammability class

UL94 V0

Electrical connection

About Print Clamps with Push-In Technology

Mounting on

DIN rail 35 mm × 7.5 mm according to DIN IEC 60715

Tight-to-close mounting

allowed

Installation position

vertical (vertical)

Protection

IP20 according to DIN EN 60529

Weight

ca. 110 g

Electric Dating

 

Power supply

AC 230 V, +10/-15 %, 48 to 63 Hz oder

AC 115 V, +10/-15 %, 48 to 63 Hz oder

DC 12 bis 24 V +15/-15 %a / AC 24 V +15/-15 %, 48 to 63 Hz

(The device must only be connected to SELV or PELV circuits)

Power consumption

with power supply 230 V: max. 1,5 W, 2,0 VA

 

with power supply 115 V: max. 1,5 W, 2,0 VA

 

with power supply DC 12 bis 24 V: max. 1,2 W

 

with power supply AC 24 V +15/-15 %: max. 0,8 W, 1,8 VA

Inputs and Outputs

 

max. 2.5 mm2, wire or stranded wire with ferrule

Leiterquerschnitt

Electrical safety

according to DIN EN 61010-1

Surge category III, pollution degree 2

Analogue inputs

Connection to SELV (secondary circuits) only

Sampling Cycle

250 ms

Speeds

2nd order digital filter; Filter time constant adjustable from 0 to 100.0 s

Accuracy timer and BePower hour counter

1 %

a Only DC 24V +15/-15% is permitted as DC supply voltage for railway applications (type suffix 950)

 

Environmental impact

 

Operating and storage temperature range

-40 to +55 °C (display to min. -10 °C), -40 to +70 °C

Climatic resistance

£ 85% relative humidity on an annual average without condensation

Electromagnetic compatibility

Emission

Stability

nach din EN 61326-1, din EN 50121-1 / 50121-3-2

Class Ba Industrial Requirement

a The product is suitable for industrial use as well as for household and small businesses.

 

Approvals/Certification Marks

 

Mark

Checkpoint

Certificate/Verification Number

Test basis

gilt für

c UL us

Underwriters Laboratories

E201387

UL 61010-1

alle Baugruppen

Data logger

The configuration and data logger data are stored in the EEPROM. They remain in place after a power failure.

 

Recording Rate

Recording Duration

1 min

approx. 1 day, 20 hours

5 min

approx. 9 days, 8 hours

15 min

approx. 28 days, 2 hours

30 min

approx. 1 Monat, 25 Tage

60 min

approx. 3 monate, 9 fog