Skip to main content

JUMO miroVIEW mit 2 Relais, 76 x 36 x 62 mm

Product number: 802126

Product information "JUMO miroVIEW mit 2 Relais, 76 x 36 x 62 mm"

JUMO miro VIEW - smart digital indicator with limit value monitoring

Typ: 701580/0-01-23-02

  •  Input: 1 resistance thermometer Pt100, Pt1000 in two-wire circuit, 1 digital input
  •  Output: 1 relay (changeover contact AC 250 V, 10 A) and 1 relay (make contact AC 250 V, 5 A) resistive load
  •  Power supply: AC 230 V +10/-15 %, 48 to 63 Hz

The smart digital indicator is used to electronically display various process variables.
The device records the process variables via resistance thermometer, thermocouple, current 0(4) to 20 mA or voltage 0 to 10 V. Other functions include limit value monitoring, min/max value storage, hold function and tare function. The device can be supplied either with 2 relays or with 1 relay and 1 digital output (DC0/14 V). It is characterised by user-friendly, clear operation in German, English, French and Spanish.
Process values, texts and parameters are displayed on two 18-segment LCD displays. Additional display elements provide information about

  •  Switching positions of the outputs
  •  Status of the timer
  •  Temperature unit

PCB terminals with push-in technology enable quick electrical installation. Operation, parameterisation and configuration are carried out via a membrane keypad with four buttons.

Display function
In addition to the conventional display of the measured value, the device offers additional functions such as

  •  Display of min/max values
  •  Hold function to hold the current measured value
  •  Tare function for weighing applications

Some of these functions can be configured using the membrane keypad on the front.

Inputs and outputs
The required analogue input can be selected when ordering:

  •  Resistance thermometer
  •  Thermocouple
  •  Current (4 to 20 mA)
  •  Voltage (0 to 10 V)

There is also a digital input for connecting a potential-free contact (not for resistance thermometers in three-wire circuit).

Depending on the device type, the following combinations are available as outputs: 2 relays (1 changeover contact, 1 NO contact), or 1 relay (NO contact) and 1 digital output DC 0/14 V, or 4 relays (NO contact).

USB device interface
The device has a Micro-B socket that is intended for connection to a PC for configuration with the setup programme. No separate power supply is required during configuration via the USB interface (USB-powered).

Electrical connection
The electrical connection is made using time-saving spring-loaded terminals (push-in technology)

Limit value monitoring
The device has three limit value monitors, each of which offers two configurable alarm functions. Any analogue signal is selected from a selector as the value to be monitored. The limit values can be defined either as an absolute value or as a different analogue signal. Additional functions:

  •  On/off delay
  •  Wiper function
  •  Alarm suppression during the switch-on phase or when parameters are changed
  •  Alarm latching
  •  Latching with acknowledgement

are available.
Comprehensive alarm and limit value functions can be realised with limit value monitoring.

Timer
After the timer is activated, a signal is output for the preset runtime, which can be inverted. The timer can also be started after a lead time has elapsed or a tolerance limit has been reached.
The service counter is used either to count the switching frequency of a binary signal or to determine its switch-on duration. As soon as the adjustable limit value is reached, a binary signal is activated and must be acknowledged. An operating hours counter is also available, which records the operating time of the device.

Setup programme
The optional setup programme enables the user to configure the device easily and conveniently via a PC. With this programme, data can be created, edited, transferred to the device and read out from there. It also offers a recording function for commissioning (start-up).

Customer-specific linearisation
Individual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics. Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial)

Dimensions

Height 11,4 cm
Length 16,5 cm
Width 10,6 cm

Weight

Weight 200 g

Other attributes

Ausgang 1 Relais (Wechsler AC 250 V, 10A) und 1 Relais (Schließer AC 250 V, 5A), ohmsche Last
Customs tariff number 90303370
Eingang 1 Widerstandsthermometer Pt100, Pt1000 in Zweileiterschaltung, 1 Digitaleingang
Spannungsversorgung AC 230 V, +10/-15 %, 48 bis 63 Hz
Technical data:

Analog Input

 0.4% from -80 °C

 

Designation

Typ

Norm

Designation

Type

Standard

ITS

Measuring range

Accuracy

Fe-CuNi

"L"

DIN 43710 (1985-12)

IPTS-68

-200 to +900 C

 0.4%

IEC 60584-1:2013

Fe-CuNi

"J"

DIN EN 60584-1:2013

ITS-90

-210 to +1200 °C

 0.4% from -100 °C

IEC 60584-1:2013

NiCr-Ni

"K"

DIN EN 60584-1:2013

2nd order digital filter; Filter constant adjustable from 0 to 100.0 sAccuracy refers to the measuring range.

 

ITS-90

-270 to +1300 °C

 0.4% from -80 °C

intern or extern (konstant)

Comparison point temperature

Ambient temperature influence

 300 ppm/K

Comparison agency

 

 500 A

 

internal or external (constant)

Comparison point temperature

0 °C (fixed)

Speeds

2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

Accuracya

Measuring current

Pt100

Designation

IEC 60751:2008

Standard

ITS

Connection type

Measuring range

Accuracy

Measuring current

Pt100

IEC 60751:2008

DIN EN 60751:2008

ITS-90

2-/3-wire

-200 to +600 °C

 0.25%

500 A

 

 

 

2-/3-wire

-200 to +600 °C

 0.25%

2nd order digital filter; Filter constant adjustable from 0 to 100.0 sAccuracy refers to the measuring range.

 

100 A

Custom

Sensor Line Resistance

max. 30  per line

Speeds

150 to 3000 

 

 2.5 V

 

 0.25%

 500 A

Accuracya

Input resistance or. Load tension

Ambient temperature influence

 300 ppm/K

Sensor Line Resistance

>  max. 30  per line

Speeds

2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

0,125 %

2,5 V

Designation

Measuring range

Accuracy

2nd order digital filter; Filter constant adjustable from 0 to 100.0 sAccuracy refers to the maximum measurement range. At small measuring spans, the linearization accuracy is reduced.

 

Input resistance or load voltage

Voltage

0 to 10 V

 0.15%

100 k

Current

 

 

Measuring Circuit Monitoring

++ = is recognized

 

4 to 20 mA

 0.125 %

 2.5 V

Short circuit (sensor/line))

0 to 20 mA

 0.125 %

 2.5 V

++

++

Ambient temperature influence

 100 ppm/K

Measuring range under/exceeding

according to NAMUR recommendation NE 43 (only current input 4 to 20 mA)

Speeds

2nd order digital filter; Filter constant adjustable from 0 to 100.0 s

---

++

(+)a

Strom 0 bis 20 mA

---

Transmitter

Measuring range below

Exceeding the measuring range

Short circuit (sensor/line)

Fracture (sensor/conduction)

Reverse polarity

Resistance thermometer

++

++

++

++

---

Thermocouple

++

++

---

++                                                                    --- = is not recognized                               (+) = is conditionally recognized

a  depending on the set characteristic curve

 

Contact closed: Input is active (R

 

(+)

 

Current 0 to 20 mAON< 1 kΩ) Contact open: Input is inactive (ROFF > 100 kΩ)

DC 0/14 V 15 %

 

---

Switching capacity contact life

 

++

100,000 circuits at rated load

---

---

Switching capacity contact life

 

---

100.000 Circuits at Rated Load

++

Switching capacity contact life

 

++

100.000 Circuits at Rated Load

++

++

Output signal current

 

++

max. 20 mA (at nominal voltage 14 V)

5 m

 

---

 

---

---

++

++ = is recognized

Max. Length

5 m

0, 1 or automatic (configurable)

 

18-Segment-LCD-Anzeigen

 

Digit height Color

Input for potential-free contact function

white

Contact closed: Input is active (R

ON

Digits incl. decimal places

4

1 relay (changeover)

max. 10 A at DC 30 V or AC 250 V, resistive load

Order Code 23

 

min. 1.5 mm2

 

1 relay (NO contact)

max. 5 A at DC 30 V or AC 250 V, resistive load

AC 230 V +10/-15 %, 48 bis 63 Hz

max. 10 A at DC 30 V or AC 250 V, resistive load

Order code 26

DC 0/14 V 15 %

DC 12 bis 24 V, ±15 % SELV

Electrical safety

after DIN EN 61010, Teil 1

Overvoltage category II up to 300 V mains voltage, Degree 2

USB device

Typ 701580

Typ AC 230 V:

max. 3,3 W

Plug Type

max. 3,6 W

Micro-B (Socket)

max. 1,7 W

Standard

Low-Speed, Full-Speed

Max. cable length

5 m

Electrical connection

on the back via spring-loaded clamps (Push-In-Technologie)

18-segment LCD displays

 

top display: 13 mm

Bottom display: 4 mm

Digits incl. decimal places

 

7

Decimal places2, max. 1,5 mm2

 

with plastic collar: min. 0,2 mm2, max. 0,75 mm2

Stripping length

8 mm

Power supply according to the ordered design

 

AC 230 V +10/-15%, 48 to 63 Hz

min. 0,75 mm2

05

AC 115 V +10/-15%, 48 to 63 Hz

16 A Load current

30

Product Families Standard DIN EN 61326-1 Class B

 

DC 12 to 24 V, ±15% SELV

Operation

 

Electrical safety

-10 bis +55 °C

according to DIN EN 61010, Part 1

Power consumption

Type AC 230 V:

 max. 3.3 W

Operation

Type AC 115 V:

 max. 3.6 W

by class 3K3

Type DC 12 to 24 V:

max. 1.7 W

Operation

Accuracy Timer

by class 1M2

by class 2M2 by class 3M3

1 %

Stability

Sampling cyclea

Industry Requirement

a The product is suitable for industrial use as well as for household and small businesses

 

max. 154 g

 

250 ms

Electrical connection

on the back via spring-loaded clamps (push-in technology)

Conductor cross-section, mechanical

upper slant cobalt blue RAL 5013, lower slope silver-grey RAL 7001

Panel thickness

Wire or stranded wire

min. 0.2 mm2, max. 1.5 mm2

(without ferrule)

Usage position

Stranded wire with ferrule

without plastic collar: min. 0.2 mm

according to DIN EN 60529, front IP65, rear IP20

with plastic collar: min. 0.2 mm

2

 

Stripping length

a The maximum permissible ambient temperature only applies to installation with vertical orientation of the display.

 

all versions

 

8 mm

Conductor cross-section, electrical

Certificates/Test Numbers

5 A load current

min. 0.75 mm2

10 A load current

min. 1.0 mm2

16 A load current

min. 1.5 mm2

CAN/CSA-22.2 No. 61010-1

(3. Ed.)

all versions

The device has approval if the relevant test mark is shown on the device.