Skip to main content

Professional analysis case boiler house with professional pH/conductivity/TDS/mV/redox/temperature hand-held meter

Product number: 891028

Product information "Professional analysis case boiler house with professional pH/conductivity/TDS/mV/redox/temperature hand-held meter"

The practical premium analysis case boiler house contains a complete hand-held laboratory for checking the feed water quality.
The professional, combined multi parameter conductivity and pH measuring instrument has two replaceable probes.  

Contents: 
  • Professional combined conductivity and pH value measuring instrument with exchangeable probes for determining the main parameter conductivity in the range of 0.00 to 200 mS/cm with a resolution of 0.01 - 0.1 - 1 µS / mS (automatic) and the pH value in the range of 0 to 14.00 (Plus Version -2.00 to 16.00) with a resolution / accuracy of 0.1 pH (Plus Version 0.01 / +0.02). In addition, the TDS value and temperature can be displayed and the instrument has an automatic temperature compensation 0-80°C (Plus Version 0 to 100°C). With an additional available ORP probe you can measure the oxidation reduction potential.
  • Duroval A water hardness test set complete with measuring tube, indicator, dosing pipette calibrated 0-30 °dH and 50 ml titration solution for approx. 100 analyses with measuring time: approx. 2 minutes
  • Duroval B water hardness test set complete with measuring tube, indicator, dispensing pipette calibrated 0-2 °dH and 50 ml titration solution for approx. 100 analyses with a measuring time of approx. 2 minutes
  • Duroval CPM test set complete with measuring tube, indicator, dosing pipette calibrated 0-20 °dH carbonate hardness, p-value (acid capacity up to pH 8.2; KS 8.2) and m-value (acid capacity up to pH 4.3; KS 4.3) and 50 ml titration solution for approx. 200 analyses with measuring time: approx. 2 minutes
  • Conductivity Calibration Solution EC 12880 μS/cm, +-1% @25°C, 1 bottle a 70ml
  • Buffer solution pH 4.01, +-1% @25°C, 1 bottle a 70ml
  • Buffer solution pH 7.01, +-1% @25°C, 1 bottle a 70ml
  • Measuring cup 100 ml
  • Black plastic case with red closure

Our portable multi-parameter measuring device with innovative high-resolution colour display is suitable for working in all conditions and offers you an integrated user-friendly guide in the form of the set-up and calibration mode. This allows the user to easily and intuitively use the instrument at any time.
The meter has automatic pH calibration with USA and NIST buffers with up to three points for pH and one point for ORP. Up to five fixed points, as well as one individual calibration point, are available for calibrating the conductivity electrode. You are supported by an intuitive symbolism on the backlit screen, including the indication of the measurement stability (adjustable) and any errors. Another advantage is that the multi-parameter meter is delivered in our professional measuring case, which contains the selected measuring electrodes, as well as our respective buffer solutions and the instructions.

Complementary advantages of the Professional Plus version:
  • GLP functions: Date and time, recall of calibration data and "Calibration due" function
  • Integrated data logger for up to 1000 data, automatic and manual
  • PC connection via USB for evaluation of measurement data (Micro-USB on the instrument side) via Data Link+ software
  • Automatic brightness control of the display (prolongs battery life)
  • Only 6 keys for easy control of all functions of the unit
  • 230V power supply unit

Weight

Weight 2 kg

Other attributes

Country of origin EU
Customs tariff number 90278930
Technical data of the measuring device
pH
Measuring range: 0 … 14.00
(Plus Version: -2.00 … 16.00)
Resolution / Accuracy: 0.1
(Plus Version: 0.01 / +0.02)
Calibration points: 1...3 automatic + 2 custom
Recognized buffers: USA, NIST
DHS sensor recognition: Yes
mV
Measuring range: -1000 … +1000
(Plus Version: -1000 … +1900)
Resolution: 1
(Plus Version: 0.1 / 1)
ORP
Calibration points: 1 point = 475 mV
Conductivity
Measuring range: 0.00 ... 200 mS
Resolution: 0.01 - 0.1 - 1 µS / mS (automatic)
Accuracy: ± 2% full scale
Calibration points: 1...5 automatic + 1 custom
Recognized buffers: 84 µS/ 147 µS/1413 µS/ 12.88 mS / 111.8 mS
Reference temperature: 15 ... 30 °C
Temperature coefficient: 0.00 ... 10.00 % / °C
Buffer indication: yes
TDS:
Measuring range: 0.1 mg/l ... 200 g/l
TDS factor: 0.40 ... 1.00
Salinity:
Measuring range: 0.1 ppm ... 100 ppt (only Plus Version)
Temperature:
Measuring range 0.0 … 100.0 °C
(Plus Version: -10.0 … 110.0 °C)
Resolution / Accuracy: 0.1 / ± 0.5°C
Temperature compensation: 0.0 … 80.0 °C
(Plus Version: 0.0 … 100.0 °C)
General:
GLP: yes (only Plus Version)
Calibration due: yes (only Plus Version)
Buffer indication: Yes
Calibration report: Yes
Stability filter: Low – Nor - High
Internal memory: yes 1000 Data (only Plus Version)
Display: High definition backligt colored LCD
Brightness settings: Manual
(Plus Version: automatic or manual)
IP protection: IP 57
Output: Micro USB (only Plus Version)
Power: 3 batteries AA 1,5 V
(Plus Version: additional 5 V power supply)
Working conditions: T= 0 … +45 °C / H = < 95 %
Dimensions / Weight (device): 185 x 85 x 45 mm / 400 g

Refill and replacement electrodes

DUROVAL® A Test kit 0-30°dH
Product number: 400020
measuring range: 0-30 °dH
Test kit for the determination of water hardness across all hardness ranges via complexometric titration with a liquid titration agent and a pipette, accurately calibrated in °dH hardness unit.   Description Complete with measuring tube, pipette calibrated from 0-30 °dH, special junction stopper, liquid indicator and 50 ml titration solution. Analyses: approx. 100 (at an average hardness of 15 °dH) Measuring time: approx. 2 minutes Accuracy: 0.5 °dH  

€26.80*
DUROVAL® B Test kit 0-2 °dH
Product number: 400030
Test kit for the determination of the water hardness in very soft or softened water samples via titration with a liquid titration agent and a pipette accurately calibrated in hardness units.   Complete with ...measuring tubecalibrated pipette from 0-2 °dHliquid indicator and 50 ml titration solution Analyses: approx. 100 (at an average hardness of 1 °dH) Measuring time: approx. 2 minutes Accuracy: 0,05 °dH    

€26.80*
DUROVAL® CPM
Product number: 400065
Test kit for the determination of the carbonate hardness, resp. the m-value (acid capacity up to pH 4.3; KS 4.3) and p-value (acid capacity up to pH 8.2; Ks 8.2) of all natural and industrial water samples via titration with a liquid titration agent and a pipette with accurate °dH and mmol/l calibrations.   Description Complete with measuring tube, pipette with calibration 0-20 °dH and 0-7 mmol/l, special junction stopper, indicators for m- and p-value and 50 ml titration solution. Analyses: approx. 100 (at an average carbonate hardness of 10 °dH) Measuring time: approx. 2 minutes Accuracy: 0.5 °dH/0.25 mmol/l

€31.00*
pH electrode 201 T for Professional pH/conductivity/TDS/mV/redox/temperature hand-held meters
Product number: 896015
Cable length: 1 meter
Cable length 1 metre BNC/Cinch connector Temperature sensor integrated

€96.40*
Conductivity cell 2301T for Professional pH/conductivity/TDS/mV/redox/temperature hand-held meters
Product number: 896017
Cable length: 1 meter
with temperature sensorC=1Measuring range 10uS...200mSCable length 1 metre, BNC/Cinch

€131.60*
Buffer solution
Product number: 890691
Size of bottle: 70 ml | pH buffer: pH 4.01 (+-0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes red colored

€3.69*
Buffer solution
Product number: 890692
Size of bottle: 70 ml | pH buffer: pH 7.00 (+-0,01pH @25°C)
High quality pH buffer solution for calibration of your pH electrodes  green colored

€3.69*
Conductivity calibration solution
Product number: 890702
Kalibierlösung: 12880 μS/cm (±1% @25°C) | Size of bottle: 70 ml
High quality conductivity calibration solution to calibrate your electrodes

€3.69*