The Testomat® ECO / EVO automatically determines the water hardness by means of titration. The device is suitable for controlling the water quality of water treatment plants, drinking water systems, industrial boilers and for monitoring process water. Approved for boiler houses | component identification no.: TÜV. WÜH. 21-025 | VdTÜV bulletin water monitoring device 100 and UL-TÜV certified (only version with wide-range power supply unit).The Testomat® style="letter-spacing: 0px;"> EVO TH convinces with new functionalities:Optical water detection when filling the measuring chamber BOB operation (operation without constant supervision)Import and export of settings (basic programming) with selectable file nameLogging of measurement data and messages / alarms using an integrated SD or optional SDHC card (2GByte) Firmware update via SD card LCD graphic display Multilingual menu with easy switching (internal programming is retained) Integrated self-test with continuous monitoring External clear / acknowledge input Free programmable password Automatic bleeding of the indicator line Doors can be changed individually Range monitoring (fall below limit value1 / exceed limit value 2) Permitted number of lack of water, freely programmable (for systems with temporarily low water pressure)[#mspacer#]Performance profile:High-precision titration using a piston dosing pump Analogue output 0/4 - 20 mA Serial RS232 interface for transfer of measurement data and messages/alarmsProgrammable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l 2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negativeanalyzes Analysis initiation: automatic interval operation (0-99 minutes) depending on quantity via contact water meter Indicator quantities: 100 und 500 ml bottles  The Testomat® EVO TH is supplied without a power switch. This is done to comply with the DIN EN 61010-1 safety standard for measuring, control and laboratory equipment. Of course, an external mains switch will be made available to you as a customer for purchase. You can order this from us as a disconnector under article no. 850925, "external cam switch with protection class IP65".

The Testomat® EVO TH CAL with additional calibration function automatically determines the water hardness by means of titration. The device is suitable for controlling the water quality of water treatment, drinking water systems, industrial boilers and for monitoring process water.The Testomat® EVO TH CAL corresponds in function to the Testomat® EVO TH:Optical water detection when filling the measuring chamberImport and export of settings (basic programming) with selectable file nameLogging of measurement data and messages / alarms using an integrated SD or optional SDHC card (2GByte)Firmware update via SD cardLCD graphic displayMultilingual menu with easy switching (internal programming is retained)Integrated self-test with continuous monitoringExternal clear / acknowledge inputFree programmable passwordAutomatic bleeding of the indicator lineDoors can be changed individuallyRange monitoring (fall below limit value1 / exceed limit value 2)Permitted number of lack of water, freely programmable (for systems with temporarily low water pressure)[#mspacer#] Performance profile: High-precision titration using a piston dosing pumpAnalogue output 0/4 - 20 mASerial RS232 interface for transfer of measurement data and messages/alarmsProgrammable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negative  analyzes Analysis initiation:automatic interval operation (0-99 minutes)depending on quantity via contact water meterIndicator quantities: 100 und 500 ml bottlesTestomat® EVO TH CAL is supplied without mains switch. This is done to comply with the safety standard DIN EN 61010-1 for measuring, control and laboratory instruments. Of course, an external mains switch is available for purchase by you as a customer. You can order it from us as a disconnector under article no. 850925, "external cam switch with protection class IP65".

The Testomat® EVO TH automatically determines the water hardness by means of titration. The device is suitable for controlling the water quality of water treatment plants, drinking water systems, industrial boilers and for monitoring process water.  Approved for boiler houses | component identification no.: TÜV. WÜH. 21-025 | VdTÜV bulletin water monitoring device 100 and UL-TÜV certified. The Testomat® EVO TH convinces with new functionalities: Optical water detection when filling the measuring chamber Import and export of settings (basic programming) with selectable file name Logging of measurement data and messages / alarms using an integrated SD or optional SDHC card (2GByte) Firmware update via SD card LCD graphic display Multilingual menu with easy switching (internal programming is retained) Integrated self-test with continuous monitoring External clear / acknowledge input Free programmable password Automatic bleeding of the indicator line Doors can be changed individually Range monitoring (fall below limit value1 / exceed limit value 2) Permitted number of lack of water, freely programmable (for systems with temporarily low water pressure) Performance profile: High-precision titration using a piston dosing pump Analogue output 0/4 - 20 mA Programmable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l 2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negative analyzes Analysis initiation: automatic interval operation (0-99 minutes) depending on quantity via contact water meter Indicator quantities: 100 und 500 ml bottles  The Testomat® EVO TH is supplied without a power switch. This is done to comply with the DIN EN 61010-1 safety standard for measuring, control and laboratory equipment. Of course, an external mains switch will be made available to you as a customer for purchase. You can order this from us as a disconnector under article no. 850925, "external cam switch with protection class IP65". The Testomat® LAB TH and Testomat® LAB TH-R (Remote)determine the water hardness (residual total hardness) fully automatically by titration. The instrument is suitable for controlling the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water. Please note that Testomat® LAB - TH and Testomat® LAB TH-R was developed for use in multi-parameter systems or for connection to a higher-level control system. In addition to the 4-20 mA output for transmitting the measured values, this series has an RS232 interface for transmitting the measured values and error & status messages. Furthermore, all data are continuously recorded on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format structured and can be used at any time for detailed observations. The Testomat® LAB TH and TH-R convinces with new functionalities: Execution of parameterization by SD card or the "Service Monitor" software via mini-USB (on the device side) to USB 2.0 (for example PC/notebook) Multilingual menu navigation software in German, English, French, Dutch, Portuguese Firmware update via SD card compact design optimized water detection based on an optical measuring method Integrated self-test with continuous monitoring Automatic venting of the indicator line Tried and tested performance profile: High-precision titration using a piston dosing pump Reliable and low-maintenance operation Minimal indicator and water consumption Analog output 4 - 20 mA for transmission of measured values Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/l Common alarm output Indicator quantities: 500 ml bottles Analysis triggering: Automatic interval operation (interval pause adjustable from 0-255 minutes) External analysis input (start/stop) Hand launch Both analysers are available in the "R" version, which includes the following additional function: Parameterisation and readout of the unit parameters via the RS232 interface Optional accessories for both devices: OLED display Protecting cover to increase the IP protection class The Testomat® EVO TH automatically determines the water hardness by means of titration. The device is suitable for controlling the water quality of water treatment plants, drinking water systems, industrial boilers and for monitoring process water.  Approved for boiler houses | component identification no.: TÜV. WÜH. 21-025 | VdTÜV bulletin water monitoring device 100 and UL-TÜV certified. The Testomat® EVO TH convinces with new functionalities: Optical water detection when filling the measuring chamber Import and export of settings (basic programming) with selectable file name Logging of measurement data and messages / alarms using an integrated SD or optional SDHC card (2GByte) Firmware update via SD card LCD graphic display Multilingual menu with easy switching (internal programming is retained) Integrated self-test with continuous monitoring External clear / acknowledge input Free programmable password Automatic bleeding of the indicator line Doors can be changed individually Range monitoring (fall below limit value1 / exceed limit value 2) Permitted number of lack of water, freely programmable (for systems with temporarily low water pressure) Performance profile: High-precision titration using a piston dosing pump Analogue output 0/4 - 20 mA Programmable hardness unit in ° dH, ° f, ppm CaCO3, mmol / l 2 independent limits with adjustable switching functions as well as switching option in accordance with an adjustable number of negative analyzes Analysis initiation: automatic interval operation (0-99 minutes) depending on quantity via contact water meter Indicator quantities: 100 und 500 ml bottles  The Testomat® EVO TH is supplied without a power switch. This is done to comply with the DIN EN 61010-1 safety standard for measuring, control and laboratory equipment. Of course, an external mains switch will be made available to you as a customer for purchase. You can order this from us as a disconnector under article no. 850925, "external cam switch with protection class IP65".

The Testomat® LAB TH determines the water hardness (residual total hardness) fully automatically by use of titration and has been developed for monitoring the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water. In view of the fact that the Testomat® LAB TH was developed for use in multi-parameter systems or for connection to a higher-level control system, we hereby offer you the Testomat® LAB TH in combination with the NeoTecMaster®, which was specially developed by our company, as a package solution at a preferential price. The 4-channel NeoTecMaster® multi-parameter controller included in this package enables the processing of up to four measurement signals in this version. A signal input on the NeoTecMaster®, in this case the RS232 interface, is used by Testomat® LAB TH to display the measured value, the trend and the status messages on the 5 inch screen. In addition to the RS232 interface, the NeoTecMaster® also has a Modbus RTU input, which you can use freely after brief technical consultation with us. (Pre-check whether your existing measurement technology to be integrated requires adjustments).  The NeoTecMaster® can be systematically supplemented with further optional NeoTec modules (function / signal converter modules) as required, thus enabling the future realisation of further control concepts in a flexible manner. A module that fundamentally expands the range of functions and is already included in the scope of delivery is our NeoTec slave relay module with which you can add potential-free relay contacts to the overall system. You can freely assign these to the incoming measurement signals and thus, for example, implement limit value-related control concepts, as well as output measurement-related messages. Further advantages of the NeoTecMaster:  Simple operation Integration of the Testomat® world of instruments, here in conjunction with the Testomat® LAB TH  Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housing  Modular range of functions can be extended by NeoTec slave and signal converter modules (measurement, control, regulation) Available as built-in or surface-mounted variant Structured continuous data recording on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format  In addition, there are proven Testomat® LAB TH functionalities:  Optimised water detection based on an optical measuring method  RS232 interface for transmission of measured values and error messages  Import and export of settings (basic programming)  Logging of measurement data and messages/alarms via integrated SD card or optionally usable SDHC card (2GByte)  Firmware update via SD card  Execution of parameterisation by means of SD card or "Service Monitor" software via mini-USB (on the unit side) to USB 2.0 (e.g. PC/notebook)  Multilingual software menu in German, English, French, Dutch, Portoguese  Integrated self-test with continuous monitoring  Automatic venting of the indicator line  Compact design  Proven performance profil: High-precision titration by means of piston metering pump  Reliable and low-maintenance operation  Minimal indicator and water consumption  Analogue output 4 - 20 mA for transmission of measured values  Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/l  Collective alarm output  Indicator quantities: 500 ml bottles  Analysis trigger:  - Automatic interval operation (interval pause adjustable from 0-255 minutes)  - External analysis input (start/stop)  - Manual start  Optional accessories available:  OLED display  Protective cover to increase the IP protection class of the Testomat® LAB TH  NeoTecMaster instrument cover