Skip to main content

N-LF2000, conductivity measuring instrument 0-20/200/2000μS/cm in wall mounted housing

Product number: 880571

Product information "N-LF2000, conductivity measuring instrument 0-20/200/2000μS/cm in wall mounted housing"

Instrument for measuring the electrical conductivity of aqueous solutions in conjunction with two-electrode measuring cells. Designed as wall-mounted version.
  • Operation at 230 V AC or 24 V DC possible
  • 2 potential-free relays - changeover switch for limit value switching (hysteresis 5 % fixed)
  • Alphanumeric display with 2 x 16 characters
  • Temperature measurement and temperature display from 0.0 °C to 90.0 °C when a Pt100 is connected
  • Switchable temperature compensation with 2.2 % / K up to 90 °C
  • Monitoring of the temperature sensor for sensor break and error message on the display
  • Switchable mode of operation for relay control
  • Output of the measured value with 0 - 10 V and 4 - 20 mA

Technical data
Measuring ranges: dependent on measuring cell and amplification
Temperature compensation: Linear 2.2 % / K, can be switched off, reference temperature 25 °C
Limit value displays: Optical by means of 2 LEDs, 2 limit values adjustable over the measuring range
Limit value outputs: 1 potential-free changeover contact, max. 6 A / 250 V AC
1 change-over contact to 230V AC (terminal 21)
Analog outputs: 0 - 10 V, Ra > 1 kOhm; corresponds to 0 - 20 / 200 / 2000 μS/cm
4 - 20 mA, Ra < 500 Ohm; corresponds to 0 - 20 / 200 / 2000 μS / cm
Power supply: 22 - 26 V DC, protected against reverse polarity, electrically isolated,
1000 V insulation voltage, or 230 V 50/60 Hz
Power consumption: Approx. 3 W / 3 VA
Protection class: IP 65
Housing: Surface-mounted housing (polycarbonate) 120 x 122 x 57 mm
Connections: 4 x M16 cable entries on the bottom of the housing.

Dimensions

Height 6,5 cm
Length 26 cm
Width 12 cm

Weight

Weight 400 g

Other attributes

Country of origin DE
Customs tariff number 90278930

Selection of suitable conductivity measuring cells and calibration solutions from our company:

N-LF3401 conductivity measuring cell C=0.1 with PT100, 3/4 inch screw-in cell and solenoid valve connector
Product number: 880574
measuring range: 0-10 / 0-20 / 0-100 / 0-200 µS/cm (K= 0,1) | screw-in cel: 3/4"
Technical data: Screw-in thread: 3/4"Material housing: POM black Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C=0.1 +/- 10%. Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: PT100 Solenoid valve connector: ST2+SL electrodes Colour cable green/yellow St1+St2 PT 100 Colour cable brown/white

€117.75*
N-LF1210 conductivity measuring cell C=1.0 with PT100, 1/2 inch screw-in cell and solenoid valve connector
Product number: 880577
measuring range: 0-1000 / 0-2000 µS/cm ( K= 1,0) | screw-in cel: 1/2"
Technical data: Screw-in thread: 1/2 "Material housing: POM black Material electrodes: V4A 4571 Material O-ring: EPDM Cell constant: C=1.0 +/- 10%. Max. Operating pressure: 6 bar Max. Operating temperature: 60°C Temperature sensor: PT100 Solenoid valve connector: ST2+SL electrodes Colour cable green/yellow St1+St2 PT 100 Colour cable brown/white

€119.45*
Conductivity calibration solution
Product number: 890696
Kalibierlösung: 147 μS/cm (±1% @25°C) | Size of bottle: 250 ml
High quality conductivity calibration solution to calibrate your electrodes Our 250 ml, 500 ml and 1000 ml bottle is characterized by a special hygienic closure, which protects the conductivity calibration solution from contamination. To provide the required calibration solution, simply squeeze the bottle together and enough conductivity calibration solution is delivered to the upper part of the bottle to perform a calibration.

€9.29*
Conductivity calibration solution
Product number: 890697
Kalibierlösung: 1413 μS/cm (±1% @25°C) | Size of bottle: 250 ml
High quality conductivity calibration solution to calibrate your electrodes Our 250 ml, 500 ml and 1000 ml bottle is characterized by a special hygienic closure, which protects the conductivity calibration solution from contamination. To provide the required calibration solution, simply squeeze the bottle together and enough conductivity calibration solution is delivered to the upper part of the bottle to perform a calibration.

€9.29*
ST 1 Conductive conductivity probe with temperature sensor PT 100
Product number: 310120
Cell constant: 0.1 | Maximum medium temperature: 40 °C | Measuring resistor (temperature sensor): PT100 | Version: PVC union nut Rp 1 ¼"
Technical data:Measuring range: 1-2.000 µS/cmCell constant: 0,1 cmConnection: PVC union nut Rp 1 ¼''Max. temperature: 40°CMeasuring resistor: PT 100Material: Stainless steelMax. Pressure: up to 6x10⁵ PA (6 bar)

€576.20*
Tip
Select stainless steel conductivity sensor 100°C (max. 13 bar) for high temperatures and high pressure (LF)
Product number: 891218
Cell constant: 0.1 | Maximum temperature and pressure: max. 100 °C / max. 13 bar (200 psig) | Measuring resistor (temperature sensor): PT100 | Version: 1/2“ NPT
Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

€456.25*
Tip
Select stainless steel conductivity sensor 100°C (max. 13 bar) for high temperatures and high pressure (LF)
Product number: 891220
Cell constant: 1 | Maximum temperature and pressure: max. 100 °C / max. 13 bar (200 psig) | Measuring resistor (temperature sensor): PT100 | Version: 1/2“ NPT
Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

€456.25*
Select conductivity sensor with graphite electrode, cell constant 0.1 and Pt100
Product number: 890826
Cell constant: 0.1 | Measuring resistor (temperature sensor): PT100

€280.20*
Select conductivity sensor with graphite electrode, cell constant 1.0 and Pt100
Product number: 890817
Cell constant: 1 | Measuring resistor (temperature sensor): PT100

€325.50*