12 Liter Stainless Steel Mixed Bed Demineralization Cartridge Filled with Premium Resin
Product number: 896529
Price on request
Product number:
896529
GTIN:
4260682388179
Product information "12 Liter Stainless Steel Mixed Bed Demineralization Cartridge Filled with Premium Resin"
Variants:
- VA-VE 13 Stainless steel demineralisation cartridge - 12 ltr. MB resin filling (⌀ 239mm)
- VA-VE 20 Stainless steel demineralisation cartridge - 19 ltr. MB resin filling (⌀ 239mm)
- VA-VE 26 Stainless steel demineralisation cartridge - 25 ltr. MB resin filling (⌀ 239mm)
- VA-VE 30 Stainless steel demineralisation cartridge - 30 ltr. MB resin filling (⌀ 239mm)
- VA-VE 46 Stainless steel demineralisation cartridge - 45 ltr. MB resin filling (⌀ 239mm)
- VA-VE 50 Stainless steel demineralisation cartridge - 49 ltr. MB resin filling (⌀ 363mm)
- VA-VE 60 Stainless steel demineralisation cartridge - 59 ltr. MB resin filling (⌀ 363mm)
- VA-VE 100 Stainless steel demineralisation cartridge - 99 ltr. MB resin filling (⌀ 363mm)
Individual components and accessories
MB A6K4 "disposable quality" mixed bed resin (no VOC)
Product number:
896495
Packaging unit:
Bag (25 litres)
MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497)
Content: 25 Liter (€6.08* / 1 Liter)
€152.00*
2x 750mm connection hose for stainless steel cartridges, 3/4" Verschr. - 3/4" Bogen mit Verschr.
Product number:
896519
Pressure hose length:
750mm
Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm
€43.00*
Tip
N-LF420 0-2µS conductivity meter with 4-20mA output, LED display and 3/4 inch screw-in thread
Product number:
880683
High-quality conductivity meter for conductivity monitoring
Our innovative conductivity meter has been specially developed for monitoring conductivity in ultrapure water (demineralised water) and has a 4-20 mA signal output that enables easy integration into higher-level control systems.The measurements are temperature-compensated, which ensures greater accuracy. With a measuring range of 0 to 2 µS/cm, our device is particularly suitable for monitoring low conductivities, such as those typically found in mixed-bed ion exchanger cartridges. The limit value is displayed by means of 2 LEDs (green/red) on the top of the device. An acrylic glass cover ensures that the current status is immediately visible.
The device has a ¾ screw thread, which can be customised for easy and safe installation. There is also the option of customisation in terms of the LEDs, including the measuring range and a private label.
Our high-quality conductivity meter offers a reliable solution for conductivity monitoring in medical areas to fulfil the guidelines and recommendations of the DGSV.
Our measuring device is also particularly suitable for mixed bed cartridge monitoring in the clinical environment.
Standard LED configuration (1 green LED, 1 red LED):
<0.5 µS/cm = green
>0.5 µS/cm to <1.0 µS/cm = green/red flashing
>1 µS/cm = red
€229.20*
Tip
N-LF5R, 0-5 µS conductivity measuring instrument with integrated 3/4" screw-in measuring cell
Product number:
851075
measuring range:
0-5 μS/cm
|
potential-free relay contact:
with
Conductivity meter for conductivity monitoring
Our innovative conductivity meter was developed specifically for monitoring the conductivity of aqueous solutions. With a measuring range of 0 to 5 µS/cm, our device is particularly suitable for monitoring low conductivities, which are typically used in the following processes:
Mixed bed cartridges
demineralisation
Reverse osmosis (2-stage)
EDI (electrode ionisation)
The limit values are indicated by means of digital displays with 2 preset limit values and 2 LEDs (green/red) for visualisation.
The device has a screw-in thread of ¾", which can be customised for easy and safe installation. There is also the option of customised versions with regard to the measuring range and a private label.
Added value
Operation at 9 V DC via supplied plug-in power supply unit
1 potential-free relay with switchable mode of operation of relay control
Limit value display optically by means of LEDs
€293.75*